Out-Rack Accessories Archivi - Land Rover Passion https://www.landroverpassion.com/en/product-category/loading-systems/out-rack-accessories/ Italian complements for Land Rover Vehicle Mon, 17 Aug 2026 07:52:19 +0000 en-US hourly 1 https://wordpress.org/?v=7.0.4 https://www.landroverpassion.com/wp-content/uploads/2026/06/cropped-LRP_LogoQuadro-32x32.jpg Out-Rack Accessories Archivi - Land Rover Passion https://www.landroverpassion.com/en/product-category/loading-systems/out-rack-accessories/ 32 32 Spare wheel clamp https://www.landroverpassion.com/en/product/spare-wheel-clamp/?utm_source=rss&utm_medium=rss&utm_campaign=spare-wheel-clamp Fri, 11 Oct 2024 15:08:04 +0000 https://www.landroverpassion.com/?post_type=product&p=9861 The Out-Rack Wheel clamp for the Out-Rack roof rack is designed to be positioned anywhere on the loading rack surface and transport the spare wheel in a practical, stable and safe manner.

The kit is detachable and when the wheel does not need to be transported, the M14 pin can be easily removed, leaving the main bracket in place, ready for the next use.

  • Materials: Stainless steel 430 and stainless steel 304
  • Bracket finish: UV-resistant powder coating
  • Kit contents:
    • no. 1 roof rack anchor bracket
    • no. 1 M14 pin
    • no. 1 washer
    • no. 1 lock nut
    • no. 1 stainless steel cable (padlock not included)
    • Stainless steel screws

L'articolo Spare wheel clamp sembra essere il primo su Land Rover Passion.

]]> L'articolo Spare wheel clamp sembra essere il primo su Land Rover Passion.

]]> Telescopic Ladder Brackets https://www.landroverpassion.com/en/product/telescopic-ladder-brackets/?utm_source=rss&utm_medium=rss&utm_campaign=telescopic-ladder-brackets Wed, 17 Apr 2024 06:22:26 +0000 https://www.landroverpassion.com/?post_type=product&p=9451 The telescopic ladder brackets can be attached anywhere on Out-Rack roof rack  allowing you to use your ladder in a stable and safe manner.

  • Materials: Carbon steel
  • Finish: UV-resistant powder coating
  • Kit contents:
    • no. 2 brackets
    • all required fittings

L'articolo Telescopic Ladder Brackets sembra essere il primo su Land Rover Passion.

]]> L'articolo Telescopic Ladder Brackets sembra essere il primo su Land Rover Passion.

]]> ULTRA SLIM L319 Roof Rack Full Height Wind Deflector https://www.landroverpassion.com/en/product/ultra-slim-roof-rack-full-height-wind-deflector/?utm_source=rss&utm_medium=rss&utm_campaign=ultra-slim-roof-rack-full-height-wind-deflector Sun, 07 Apr 2024 08:14:38 +0000 https://www.landroverpassion.com/?post_type=product&p=9367 The ULTRA SLIM L319 Out-Rack full height deflector is for customers who want to add extra quietness to the Ultra Slim roof rack for Land Rover Discovery 3/4. It is installed in place of the standard deflector supplied as standard, and is particularly suitable for those with sunroofs. Materials: Aluminium Finish: UV-resistant powder coating Kit […]

L'articolo ULTRA SLIM L319 Roof Rack Full Height Wind Deflector sembra essere il primo su Land Rover Passion.

]]> The ULTRA SLIM L319 Out-Rack full height deflector is for customers who want to add extra quietness to the Ultra Slim roof rack for Land Rover Discovery 3/4.

It is installed in place of the standard deflector supplied as standard, and is particularly suitable for those with sunroofs.

  • Materials: Aluminium
  • Finish: UV-resistant powder coating
  • Kit contents:
    • no. 1 wind fairing
    • no. 1 rubber seal
    • all required fittings

L'articolo ULTRA SLIM L319 Roof Rack Full Height Wind Deflector sembra essere il primo su Land Rover Passion.

]]> 270° Awning Bracket Kit https://www.landroverpassion.com/en/product/270-awning-bracket-kit/?utm_source=rss&utm_medium=rss&utm_campaign=270-awning-bracket-kit Wed, 22 Nov 2023 07:24:09 +0000 https://www.landroverpassion.com/?post_type=product&p=9009 The 270° Awning Bracket Kit for Out-Rack roof racks have been designed to allow the installation of a batwing-type awning, minimising the space required on the loading surface so as not to penalise the load that can be carried. The design of the brackets and the final height of the awning allow the tailgate to […]

L'articolo 270° Awning Bracket Kit sembra essere il primo su Land Rover Passion.

]]> The 270° Awning Bracket Kit for Out-Rack roof racks have been designed to allow the installation of a batwing-type awning, minimising the space required on the loading surface so as not to penalise the load that can be carried. The design of the brackets and the final height of the awning allow the tailgate to be opened easily.

The kit is available in 2 versions:

  • 3 brackets kit: for awnings with a net weight (excluding brackets) of up to 25kg
  • 4 brackets kit: for awnings with a net weight (excluding brackets) over 25kg

The product is not suitable for the installation of traditional straight awnings, for which specific brackets are available.

  • Materials: Stainless steel
  • Finish: Anti-UV powder coating
  • Kit content:
    • brackets
    • stainless steel screws

L'articolo 270° Awning Bracket Kit sembra essere il primo su Land Rover Passion.

]]> Awning Brackets Kit https://www.landroverpassion.com/en/product/awning-brackets-kit/?utm_source=rss&utm_medium=rss&utm_campaign=awning-brackets-kit Wed, 22 Nov 2023 06:55:51 +0000 https://www.landroverpassion.com/?post_type=product&p=8999 The awning brackets for the Out-Rack roof racks attach to the roof rack minimising the space required on the loading floor. Each bracket has holes and slots of different sizes to easily fit any type of awning, making assembly simple, quick and customisable. In addition, additional holes have been drilled in the top to add […]

L'articolo Awning Brackets Kit sembra essere il primo su Land Rover Passion.

]]> The awning brackets for the Out-Rack roof racks attach to the roof rack minimising the space required on the loading floor.

Each bracket has holes and slots of different sizes to easily fit any type of awning, making assembly simple, quick and customisable. In addition, additional holes have been drilled in the top to add additional accessories such as a radio antenna.

This type of bracket is not suitable for the installation of 270° awnings, for which a specific product is available HERE.

  • Materials: Stainless steel
  • Finish: UV-resistant powder coating
  • Kit contents:
    • no. 2 brackets
    • all required fittings

L'articolo Awning Brackets Kit sembra essere il primo su Land Rover Passion.

]]> Out-Rack CB Antenna Bracket https://www.landroverpassion.com/en/product/out-rack-cb-antenna-bracket/?utm_source=rss&utm_medium=rss&utm_campaign=out-rack-cb-antenna-bracket Tue, 21 Nov 2023 15:14:10 +0000 https://www.landroverpassion.com/?post_type=product&p=8985 The CB Antenna Bracket will allow you to install the most common antennas on the market with a 12.5 mm diameter connection in a stable and discreet manner. Its special design is designed to fix it in any position of the parcel rack, ends or centre crossbars the choice is yours. Materials: Stainless steel Finish: UV-resistant powder […]

L'articolo Out-Rack CB Antenna Bracket sembra essere il primo su Land Rover Passion.

]]> The CB Antenna Bracket will allow you to install the most common antennas on the market with a 12.5 mm diameter connection in a stable and discreet manner.

Its special design is designed to fix it in any position of the parcel rack, ends or centre crossbars the choice is yours.

  • Materials: Stainless steel
  • Finish: UV-resistant powder coating
  • Kit contents:
    • no. 1 bracket
    • all required fittings

L'articolo Out-Rack CB Antenna Bracket sembra essere il primo su Land Rover Passion.

]]> Out-Rack Camping Table Rails https://www.landroverpassion.com/en/product/out-rack-camping-table-rails/?utm_source=rss&utm_medium=rss&utm_campaign=out-rack-camping-table-rails Sun, 05 Nov 2023 05:31:04 +0000 https://www.landroverpassion.com/?post_type=product&p=8945 Out-Rack's table rails allow the transport of tables up to 30 mm thick, such as the practical and economical Decathlon 'Quechua' tables shown in the photos.

L'articolo Out-Rack Camping Table Rails sembra essere il primo su Land Rover Passion.

]]> Out-Rack’s table rails allow the transport of tables up to 30 mm thick, such as the practical and economical Decathlon ‘Quechua’ tables shown in the photos.

The table rails do not take away any useful loading space from the rack as they are installed underneath, thus exploiting a normally unused space. You can adjust their width according to your needs, and thanks to the positioning of two end buffers you can choose whether to transport one or two tables.

COMPATIBILITY
The Out-Rack table rail kit is compatible with all short or long Out-Rack roof racks for Discovery L319 at standard height (roof or rail installation), not equipped with shark type antenna.
It is not compatible with the low “Ultra Slim” version. Please also check the type of ladder installed as depending on the shape it may not allow the tables to be inserted/exited. In case of doubt, please contact us by email before purchasing.

  • Material: Steel
  • Finish: Anti-UV powder coating
  • Kit contents:
    • no. 2 table rails
    • no. 2 rubber anti-vibration end-pads
    • no. 1 front closing bracket
    • no. 1 fixing screw kit

L'articolo Out-Rack Camping Table Rails sembra essere il primo su Land Rover Passion.

]]> Propane tank holder https://www.landroverpassion.com/en/product/propane-tank-holder/?utm_source=rss&utm_medium=rss&utm_campaign=propane-tank-holder Sun, 24 Sep 2023 08:26:01 +0000 https://www.landroverpassion.com/?post_type=product&p=8882 The Out-Rack Propane Tank holder is made of steel, the body is painted with special UV-resistant paint to preserve its appearance over time, the stainless steel closing band is equipped with an eyelet for a padlock and an adjustable hook.

L'articolo Propane tank holder sembra essere il primo su Land Rover Passion.

]]> The Out-Rack Propane Tank holder is made of steel, the body is painted with special UV-resistant paint to preserve its appearance over time, the stainless steel closing band is equipped with an eyelet for a padlock and an adjustable hook.

The Out-Rack Propane Tank holder is designed to accommodate tank with a maximum diameter of 20cm (7.8″), typically 2 and 3 kg tanks There are holes and slots in the body for multiple adjustments, so all you have to do is move the closure strip to the desired height and width to accommodate your cylinder.

The holder can be mounted ‘on the wall’, such as on the side of a trailer, or on any generic rack with 8 mm slots.

if you own an Out-Rack roof rack, this specific kit is available for you.

  • Materiale: Steel
  • Finish: UV-resistant powder coating
  • Kit contents:
    • nr. 1 Propane tank holder
    • nr. 1 adjustable locking band
    • nr. 1 fittings kit
    • nr. 1 anti-vibration rubber spacers

L'articolo Propane tank holder sembra essere il primo su Land Rover Passion.

]]> Propane tank holder for Out-Rack roof racks https://www.landroverpassion.com/en/product/propane-tank-holder-for-out-rack-roof-racks/?utm_source=rss&utm_medium=rss&utm_campaign=propane-tank-holder-for-out-rack-roof-racks Sun, 24 Sep 2023 08:03:00 +0000 https://www.landroverpassion.com/?post_type=product&p=8872 The Propane tank holder for Out-Rack roof racks is made of steel, the body is painted with special UV-resistant paint to preserve its appearance over time, and the stainless steel closing band is equipped with a padlock eyelet and adjustable hook.

L'articolo Propane tank holder for Out-Rack roof racks sembra essere il primo su Land Rover Passion.

]]> The Propane tank holder for Out-Rack roof racks is made of steel, the body is painted with special UV-resistant paint to preserve its appearance over time, and the stainless steel closing band is equipped with a padlock eyelet and adjustable hook.

The Out-Rack propane tank holder, is designed to accommodate tanks with a maximum diameter of 20cm, typically 2 and 3 kg of propane. There are holes and slots on the body for multiple adjustments, so you can simply move the locking strip to the desired height and width to accommodate your cylinder.

The tank holder holder can be fixed to any of the crossbars of the Out-Rack roof racks, in the position best suited to your needs. It can alternatively be fixed ‘wall-mounted’, such as to the side of a trailer, or to any generic rack with 8mm slots.

  • Materiale: Steel
  • Finish: UV-resistant powder coating
  • Kit contents:
    • nr. 1 Propane tank holder
    • nr. 1 adjustable locking band
    • nr. 1 fittings kit
    • nr. 1 anti-vibration rubber spacers
    • nr. 2 Out-Rack roof racks brackets

If not in stock, please contact us for shipping times and costs.

L'articolo Propane tank holder for Out-Rack roof racks sembra essere il primo su Land Rover Passion.

]]> Propane tank holder for Spare Wheel Carrier https://www.landroverpassion.com/en/product/propane-tank-holder-for-spare-wheel-carrier/?utm_source=rss&utm_medium=rss&utm_campaign=propane-tank-holder-for-spare-wheel-carrier Sun, 24 Sep 2023 04:24:16 +0000 https://www.landroverpassion.com/?post_type=product&p=8858 The Out-Rack Propane tank holder allows you to transport and use a gas bottle on the rear spare wheel.

L'articolo Propane tank holder for Spare Wheel Carrier sembra essere il primo su Land Rover Passion.

]]> The Out-Rack Propane tank holder allows you to transport and use a gas bottle on the rear spare wheel.

It is made of Steel and powder-coated with special UV paint to preserve its appearance over time. The stainless steel locking band is equipped with a padlock eyelet and adjustable hook.

It is designed to accommodate tanks with a maximum diameter of 20cm (7.8″), typically 2 and 3 kg propane tanks. There are holes and slots on the body for multiple adjustments, so you can simply move the closure strip to the desired height and width to accommodate your propane tank.

The Out-Rack propane tank holder, if separated from its wheel adapter, can alternatively be fixed ‘on the wall’, such as on the side of a trailer, or on any generic rack with 8 mm slots.

  • Materiale: Steel
  • Finish: UV-resistant powder coating
  • Kit contents:
    • nr. 1 Propane tank holder
    • nr. 1 wheel spare adapter
    • nr. 1 adjustable locking band
    • nr. 1 fittings kit
    • nr. 1 anti-vibration rubber spacers
    • nr. 1 ratchet strap kit

If not in stock, please contact us for shipping times and costs.

L'articolo Propane tank holder for Spare Wheel Carrier sembra essere il primo su Land Rover Passion.

]]>