It offers a large, perfectly flat loading area of over 2.sqm (1560mm x 1305mm), fully usable.

It is installed on the car’s rails and is definitely the most practical version for those who want to put on and take off the roof rack frequently. Just remove six screws and you’re done! A 5-minute job.

The Out-Rack roof rack is also modular! Do you have a Defender 110, but your needs have changed and you want to convert it to the long version measuring 2160 mm x 1305 mm? No problem. Contact us and we will sell you the parts you need to do so.

The Ultra slim Out-Rack milestones?

It is light. Without sacrificing strength, the total weight is kept down to only 18kg total. This means being able to load more weight on the roof.

It is Ultra Slim. While maintaining compatibility with the sunroof and rear antenna, its aluminum profiles only 3cm thick limits the height footprint to only 10cm total.

It is silent. Each roofrack comes with a front deflector so you can travel at motorway speeds in absolute comfort (Cannot be installed in cars with sunroofs).

It is perfectly flat. A flat loading surface facilitates the installation of any load, even if it exceeds the limits of the roof rack itself.

It is practical. T-slots arranged throughout the roof rack offer the possibility of inserting bolts or eyebolts without positioning constraints. Place the load wherever you want and secure it to the Out-Rack with millimetre precision!

It is corrosion-proof. The loading surface is made of Aluminum. The brackets are made of 430 stainless steel and the hardware is 304 stainless steel. The entire structure is also powder coated with black anti-UV finish with polyester primer.

The Out-Rack roof rack is shipped in kit and is easy to assemble. The positioning of its 7 loading crossbars “suggested” in the assembly instructions is designed to let you walk safely on the rack since your foot will always rest on at least two crossbars and makes it compatible with all Out-Rack accessories. You can still position them as needed without any constraints. In fact, the Out-Rack system allows you to place them where they are most useful to you.

Complete your Out-Rack loading system with the available accessories to make it your perfect travelling mate.

Kit contents:

• Out-Rack Ultra Slim roof rack for New Defender L663 90, 110 and 130 equipped with longitudinal rails
• Full height wind fairing
• Fittings

L'articolo Short Roof Rack for New Defender L663 sembra essere il primo su Land Rover Passion.

The technical panel for the Gullwing is designed to facilitate the loading of water into a tank inside the vehicle, and a quick water connection is also provided for connecting a tap, shower, etc. In addition, provision is made for a control panel for electrical consumers.

The kit can be installed without removing the cabinet and is available for both the right and left side.

• Material: iron
• Finish: Anti UV powder coating
• Kit contents:
  • no. 1 technical panel
  • no. 1 water inlet cap
  • no. 1 brass quick coupling water outlet
  • No. 1 Rocker switch panel (switches not included)

If not in stock, contact us to find out about shipping times and costs.

L'articolo Gullwing Technical panel for Discovery L319 sembra essere il primo su Land Rover Passion.

It offers a large, perfectly flat loading area of over 2.8sqm (2160mm/85.03″ x 1305mm/51.38″) that can be utilized along its entire length. In fact, unlike the original roof rack which has a long front and rear overhang on which the weight of the load needs to be reduced, for our Out-Rack roof rack for New Defender 110 we have designed the roof brackets to support it along its entire length. It is therefore installed with 4 attachment points on each side. Three of them, on the longitudinal rails plus one at the front fixing point, present on the roof but covered by the front plastic of the rails that will therefore have to be drilled. Don’t worry, a simple plastic cover is drilled, not the roof! Once the roof rack is eventually removed, it will be enough to cover the hole with a common plastic cap as already present in Defenders that do not have those rails. In this way, the roof rack will be suitable for loading roof tents or what you need for your travels in every inch of it.

The Ultra slim Out-Rack milestones?

It is light. Without sacrificing strength, the total weight is kept down to only 27kg total. This means being able to load more weight on the roof.

It is Ultra Slim. While maintaining compatibility with the sunroof and rear antenna, its aluminum profiles only 3cm thick limits the height footprint to only 10cm total.

It is silent. Each roofrack comes with a front deflector so you can travel at motorway speeds in absolute comfort.

It is perfectly flat. A flat loading surface facilitates the installation of any load, even if it exceeds the limits of the roof rack itself.

It is practical. T-slots arranged throughout the roof rack offer the possibility of inserting bolts or eyebolts without positioning constraints. Place the load wherever you want and secure it to the Out-Rack with millimetre precision!

It is corrosion-proof. The loading surface is made of Aluminum. The brackets are made of 430 stainless steel and the hardware is 304 stainless steel. The entire structure is also powder coated with black anti-UV finish with polyester primer.

The Out-Rack roof rack is shipped in kit and is easy to assemble. The positioning of its 9 loading crossbars “suggested” in the assembly instructions is designed to let you walk safely on the rack since your foot will always rest on at least two crossbars and makes it compatible with all Out-Rack accessories. You can still position them as needed without any constraints. In fact, the Out-Rack system allows you to place them where they are most useful to you.

Complete your Out-Rack loading system with the available accessories to make it your perfect travelling mate.

Kit contents:

• Out-Rack New Defender 110 L663
• Full height wind fairing
• Fittings

Fitting instruction and videos

Installation guide

Videos:

L'articolo Roofrack for New Defender 110 L663 sembra essere il primo su Land Rover Passion.

With a total footprint of only 9 cm, it allows access to all parking spaces with a height limit of 1,90m, even in Standard height. If your vehicle is equipped with the Easy Lift suspension module, you can even access those limited to 1.00 metres! It offers a good, perfectly flat loading area of more than 2.0sqm (1560mm x 1305mm), suitable for loading roof tents or whatever you need for your travels. In this case, the Easy Lift suspension module can also help you to automatically level the car and sleep in comfort!

The Out-Rack Roof Rack for Range Rover Sport L320 is compatible with vehicles equipped with sunroof and ‘shark’ type antenna.

The Ultra slim Out-Rack milestones?

It is light. Without sacrificing strength, the total weight is always low. This means you can put more weight on the roof.

It is Ultra Slim. With its profiles only 3 cm thick, you reduce the overall height. The total height may vary depending on the car model and roof rack version chosen, please refer to the specific product page.

It is silent. Each roofrack comes with a front deflector so you can travel at motorway speeds in absolute comfort.

It is perfectly flat. A flat loading surface facilitates the installation of any load, even if it exceeds the limits of the roof rack itself.

It is practical. T-slots arranged throughout the roof rack offer the possibility of inserting bolts or eyebolts without positioning constraints. Place the load wherever you want and secure it to the Out-Rack with millimetre precision!

It is corrosion-proof. The main frame is made of aluminium. The brackets and hardware are made of 430 steel. The whole frame is also powder-coated with a black anti-UV finish.

The Out-Rack roof rack is shipped in kit and is easy to assemble. The positioning of the loading crossbars “suggested” in the assembly instructions is designed to allow you to walk safely on the rack as your foot will always rest on at least two crossbars. You can still position them as required without any constraints. In fact, the Out-Rack system allows you to place them where they are most useful to you.

Complete your Out-Rack loading system with the available accessories to make it your ideal travelling companion.

Kit contents:

• Out-Rack loading floor
• Range Rover Sport L320 brackets
• Wind fairing
• Fittings

If not in stock, contact us for knows delivery times and costs

L'articolo Roofrack for Range Rover Sport L320 sembra essere il primo su Land Rover Passion.

It is installed in place of the standard deflector supplied as standard, and is particularly suitable for those with sunroofs.

• Materials: Aluminium
• Finish: UV-resistant powder coating
• Kit contents:
  • no. 1 wind fairing
  • no. 1 rubber seal
  • all required fittings

L'articolo ULTRA SLIM L319 Roof Rack Full Height Wind Deflector sembra essere il primo su Land Rover Passion.

The kit is available in 2 versions:

• 3 brackets kit: for awnings with a net weight (excluding brackets) of up to 25kg
• 4 brackets kit: for awnings with a net weight (excluding brackets) over 25kg

The product is not suitable for the installation of traditional straight awnings, for which specific brackets are available.

• Materials: Stainless steel
• Finish: Anti-UV powder coating
• Kit content:
  • brackets
  • stainless steel screws

L'articolo 270° Awning Bracket Kit sembra essere il primo su Land Rover Passion.

Each bracket has holes and slots of different sizes to easily fit any type of awning, making assembly simple, quick and customisable. In addition, additional holes have been drilled in the top to add additional accessories such as a radio antenna.

This type of bracket is not suitable for the installation of 270° awnings, for which a specific product is available HERE.

• Materials: Stainless steel
• Finish: UV-resistant powder coating
• Kit contents:
  • no. 2 brackets
  • all required fittings

L'articolo Awning Brackets Kit sembra essere il primo su Land Rover Passion.

Its special design is designed to fix it in any position of the parcel rack, ends or centre crossbars the choice is yours.

• Materials: Stainless steel
• Finish: UV-resistant powder coating
• Kit contents:
  • no. 1 bracket
  • all required fittings

L'articolo Out-Rack CB Antenna Bracket sembra essere il primo su Land Rover Passion.

The table rails do not take away any useful loading space from the rack as they are installed underneath, thus exploiting a normally unused space. You can adjust their width according to your needs, and thanks to the positioning of two end buffers you can choose whether to transport one or two tables.

COMPATIBILITY
The Out-Rack table rail kit is compatible with all short or long Out-Rack roof racks for Discovery L319 at standard height (roof or rail installation), not equipped with shark type antenna.
It is not compatible with the low “Ultra Slim” version. Please also check the type of ladder installed as depending on the shape it may not allow the tables to be inserted/exited. In case of doubt, please contact us by email before purchasing.

• Material: Steel
• Finish: Anti-UV powder coating
• Kit contents:
  • no. 2 table rails
  • no. 2 rubber anti-vibration end-pads
  • no. 1 front closing bracket
  • no. 1 fixing screw kit

L'articolo Out-Rack Camping Table Rails sembra essere il primo su Land Rover Passion.

The Out-Rack Propane Tank holder is designed to accommodate tank with a maximum diameter of 20cm (7.8″), typically 2 and 3 kg tanks There are holes and slots in the body for multiple adjustments, so all you have to do is move the closure strip to the desired height and width to accommodate your cylinder.

The holder can be mounted ‘on the wall’, such as on the side of a trailer, or on any generic rack with 8 mm slots.

if you own an Out-Rack roof rack, this specific kit is available for you.

• Materiale: Steel
• Finish: UV-resistant powder coating
• Kit contents:
  • nr. 1 Propane tank holder
  • nr. 1 adjustable locking band
  • nr. 1 fittings kit
  • nr. 1 anti-vibration rubber spacers

L'articolo Propane tank holder sembra essere il primo su Land Rover Passion.